Skip to main content

RFID Card Registration

:::tip Compatibility Only 13.56 MHz RFID cards compatible with EPIC work with this lock. Cards included in the box must be registered manually. :::

:::caution Door must be open during registration :::

Mode A — Register all at once​

  1. Open the battery cover. Press the Registration button once.
  2. Enter your PIN, then press *.
  3. Press number 2 (or 4 depending on model) to select RFID mode.
  4. Place each card on the reader one at a time. A beep confirms each registration.
  5. Press Registration to finish.

Up to 200 cards can be registered.

Mode B — Register one by one (assign slot numbers)​

  1. Follow steps 1-3 above.
  2. Enter a 3-digit slot number (001–200), then press # or *.
  3. Place the card on the reader. The slot number flashes on the keypad.
  4. Repeat for additional cards, or press Registration to finish.