Special Features

Guest PIN Registration

Steps

1. Open the [Battery Cover]. Press [Registration] button once. The 'beep' sound will be heard.
2. Enter current pin number, followed by [✱] button. Check if the numbers [1, 2, 3, 7, 8, 9, 0, #] has been lighted on the number pad. Press number 3 button.
3. Enter New Guest Pin Number to be registered (4~12 digits). And press [✱] button to complete the registration.

note

The guest pin number is 1 time entry only.

note

New registration will delete old guest pin number.

note

When registration mode is cancelled old pin number will be restored.

Outside Force Lock

When this is set the door cannot be opened from the inside. [Open/Close] button is disable.

Steps

1. While the door is closed, touch the [Number Pad]
2. Enter Pin Number
3. Touch the [✱] button and touch the [0] button
4. When the melody is heard, the setting is complete. (The [Open/Close] button is disabled.)

Cancellation: Open the door by pin number and the [Force Lock] setting will be cancelled

Inside Force Lock

When this is set the door cannot be opened from the outside. Pin number entry is disabled.

Steps

1. While the door is closed
2. Press the [Safety button] for 3 seconds. When the melody is heard, the setting is complete.

Cancellation: Open the door by the [Manual Lock/unlock knob] or by the [Open/Close] button inside and the [Force Lock] will be cancelled.

Auto / Manual Lock Setting

Sets the door locking mode to Manual or Automatic Lock Mode

Steps

1. Press [Open/Close] button
2. Touch the Number pad
3. Enter Pin number, then press [✱] button 2 times
4. Press [4] button: Auto lock setting. Press [7] button: Manual lock setting

note

Automatic mode is set in default. When you set the manual lock, The door will not automatically lock after closing the door. You need to press [Open/Close] button inside or Touch the number pad outside to close the door

Multi-touch Security Setting

Steps

1. Touch the [Number Pad] on the Outbody. Enter the Pin number. Press the [✱] button.
2. Press the [5] button on the number pad, A melody will be heard and Multi-touch feature setting is complete.

Cancellation: To cancel the setting, just repeat steps 1, 2.

note

This is a security feature that prevents the password from being exposed, by removing traces of fingerprint patterns on the number pad. The multi-touch feature is disabled in default.

caution

When multi-touch feature is enabled, after entering pin number press the 3 digit number that is displayed on the screen. Press [✱] button and the door will open. When this feature is enabled, the Random number feature is cancelled.

Dual-mode Security Setting

Steps

1. Press [Register] button for 5 seconds. The entire LED will light up. After 3 seconds the alarm will stop. And after 2 seconds it will be on again.
2. Enter current user password. When you press [✱] button, The front panel LED will blink and light-up.
3. Press [1] button to Turn-Off Dual-Mode Security. Press [3] button to Turn-On Dual-Mode Security. During Dual-Mode Security Setting, when the confirmation sound is heard, everything will be turned-off.

note

The Pin number & Smart key should be registered first before setting this feature

Home Network Module & Remote Control

(Optional Settings) This feature lets you open the door remotely via home network devices and Remote Control

Steps

1. Press [Registration] button. Enter pin number. Followed by [✱] button
2. Home Network Module: Press [Registration] button. Remote Control: Press [OPEN] button
3. Check if the numbers [1, 2, 3, 7, 8, 9, 0, #] has been lighted on the number pad. And registration is complete

Deletion Steps

1. Press [Registration] button. Enter pin number. Followed by [✱] button
2. Check if the numbers [1, 2, 3, 7, 8, 9, 0, #] has been lighted. Press [0] button
3. Press [✱] button for 5 seconds. When the melody is heard. Deletion is complete

note

For registration of additional remote control Repeat step number 2. Up to 5 remote controls can be registered